找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: Emerging Trends in Science, Engineering and Technology; Proceedings of Inter S Sathiyamoorthy,B. Elizabeth Caroline,J Gnana Jay Conference

[复制链接]
楼主: Flippant
发表于 2025-3-27 00:56:47 | 显示全部楼层
发表于 2025-3-27 04:47:26 | 显示全部楼层
Odradek, or Non-biodegradable Object-Life,eformation during machining by designing the fixture layout. The finite element method (FEM) has been used to determine the workpiece deformation. The fixture layout model has been developed using Neuro-genetic hybrid system.
发表于 2025-3-27 06:16:08 | 显示全部楼层
Green Carrier the payload. Raked wingtips, canards, and elliptical shaped fuselage are the highlighting features of the proposed design. Reduction of drag will also be observed due to delay in separation point. Expected outcome of proposed design is less amount of fuel burn because of reduction in drag.
发表于 2025-3-27 10:04:38 | 显示全部楼层
Integration of LiBr-H2O Vapor Absorption Refrigeration Cycle And Power Cyclecondenser. So, this integration minimizes the condenser load by limiting to latent heat rejection only. The plant results 70 kW of power and 433 kW of cooling at the optimized conditions of strong solution (1 kg/s and 0.48 concentrations) and the supply temperature of 250 °C.
发表于 2025-3-27 17:37:21 | 显示全部楼层
Theoretical Analysis of Overall Heat Loss Coefficient in a Flat Plate Solar Collector with an In-Buioss. The present theoretical analysis is on Overall Heat Loss Coefficient of a solar collector with and without in-built Phase Change Material (PCM). Theoretical results show a reduction in Overall loss coefficient with decrease in distance between the absorber plate and PCM surface, and decrease in mean absorber plate temperature.
发表于 2025-3-27 21:31:40 | 显示全部楼层
Neuro-Genetic Hybrid System for 2D Fixture Layouteformation during machining by designing the fixture layout. The finite element method (FEM) has been used to determine the workpiece deformation. The fixture layout model has been developed using Neuro-genetic hybrid system.
发表于 2025-3-27 23:47:19 | 显示全部楼层
发表于 2025-3-28 06:04:13 | 显示全部楼层
https://doi.org/10.1007/978-3-319-44144-3chloride (MBTH). The absorption measurement is done immediately by using UV–visible spectrophotometer. Upon increasing the methanol blend over petrol the readings were identified. On increasing methanol blend the PPM has been found to decrease at 100 % methanol at 100 % load, 3.5 PPM has been noticed.
发表于 2025-3-28 06:37:08 | 显示全部楼层
https://doi.org/10.1007/978-1-349-81682-8e twisted tape inserts were calculated and compared with the plain tube data. The results show that there were a significant increase in heat transfer coefficient, friction factor, and it was found that the thermal Performance of smooth tube is better than the full length twisted tape by 2.0–2.2 times.
发表于 2025-3-28 13:24:34 | 显示全部楼层
On Doing Fieldwork in Palestine1 kW of process heat has been gained with 45.5 tons of refrigeration. This work infers that with small amendment in traditional refrigeration cycle results in an increased efficiency and converts from only cooling to cooling cogeneration plant.
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-6-5 21:52
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表