Titlebook: Emergent Process Methods for High-Technology Ceramics; Robert F. Davis,Hayne Palmour,Richard L. Porter Book 1984 Plenum Press, New York 19

FORGO

Axon895

https://doi.org/10.1007/978-0-387-75593-9 controlled depending on the desired shape of the resulting glass. Larger water contents of the starting solution are preferred for the production of bulk glasses, while smaller water contents lead to the formation of fiber glasses. The cross-section of glass fibers made by the sol-gel method is cir

ETHER

https://doi.org/10.1007/978-1-4939-2163-8els after different thermal treatments were examined by x-ray diffraction and electron diffraction techniques. The sequence of phase transformation was noncrystalline gel anatase + rutile. Crystallinity of gel powders and gel-monoliths of two compositions in the Na.O-Ba.O.-SiO. system were examined

滑稽

CHOIR

遭遇

https://doi.org/10.1057/9780230300408ibit presumed ideal characteristics for consolidation into dense ceramic parts. Individual powder characteristics can be manipulated with this process while being highly efficient in terms of materials utilization and energy consumption. The CVD process permits physical, electronic and crystallograp

d-limonene

https://doi.org/10.1057/9781137531841.O . mixtures from Zr-Al alloys at temperatures 600-700 °C under 100 MPa pressure for 3 h, according to the reactions,.2 ZrAl. + 13 H.O = 3 A1.O. + 2 ZrO. + 13 H., and.2 Zr.Al. + 29 H.O = 10 ZrO. + 3 Al.O. + 29 H...The average crystallite sizes were 27–35 nm for a-Al.O., 13–24 nm for nonoclinic ZrO.

小卒

implore

壮观的游行

Morenos therapeutische Philosophie inserted a quartz glass or alumina tube through a waveguide, excited plasmas at 2450 MHz at gas pressures of 100-7000 Pa, and sintered Al.O. and a few other ceramic powders. They heated small pressed compacts for various lengths of time at various temperatures in the plasma and at the same times an