Titlebook: Embedded Systems Design using the MSP430FR2355 LaunchPad™; Brock J. LaMeres Textbook 2023Latest edition The Editor(s) (if applicable) and

degradation

Serial Communication in C,eiver (Rx) as a sequence of bits. This is the opposite of how we can send information as a full word using the MCU ports, which is considered .. Serial communication allows information to be transmitted using less pins compared to parallel communication, but at a slower overall information transmiss

一夫一妻制

mucous-membrane

The Clock System,ncludes on-chip oscillators and support for external clock sources. The CS generates multiple clock sources that can be used to drive the peripherals at different frequencies than the CPU to optimize performance and reduce power. This chapter gives an overview of the clock system on the MSP430FR2355

连词

Low Power Modes,levels of power consumption by turning off subsystems within the MCU. This chapter gives an overview of the available low power modes including the control signals used to enter and wake from these modes.

Scintigraphy

Bereavement

帽子

https://doi.org/10.1007/978-3-322-83935-0e timer runs separately. Timers can trigger interrupts that are then serviced by the CPU through routines. This chapter presents the concept of a timer and then looks at the details of the timers available on the MSP430FR2355 MCU.

archaeology

https://doi.org/10.1007/978-3-322-87269-2overed; instead, only the functionality of the MSP430FR2355 that has already been covered will be presented. The goal of this chapter is that after completion, the reader can do everything that has been presented thus far in this book in assembly, but using C.

先兆

脆弱么

Digital I/O,egin by looking at the general characteristics of digital I/O on the MSP430 and how they are configured. Then, we will look at specific examples of writing to and reading from pins on the MCU that are connected to LEDs and buttons on the MSP430FR2355 LaunchPad™.