Titlebook: EMI-Resilient Amplifier Circuits; Marcel J. van der Horst,Wouter A. Serdijn,André C. Book 2014 Springer International Publishing Switzerla

滑稽

The Cascode and Differential Amplifier Stages, accuracy of the transfers, special combinations of active devices have been developed. These combinations often consist of two active devices connected in such a way that the total behavior of the combination is that of one active device with improved behavior.

Infusion

Introduction,nal power. For each of the three limitations the system has to be optimized. In a structured design process, functionality of the system is split into subsystems that can be optimized separately of each other.

易改变

Brochure

Modelling of Active Devices,junction transistor (.), the metal-oxide-semiconductor field-effect transistor (.) and the field-effect transistor operating with a reverse biased gate-source junction. Both the junction field-effect transistor (.) and the metal-semiconductor field effect transistor (.) belong to the latter type.

财主

The Cascode and Differential Amplifier Stages, accuracy of the transfers, special combinations of active devices have been developed. These combinations often consist of two active devices connected in such a way that the total behavior of the combination is that of one active device with improved behavior.

Constitution

Design of ,-Resilient Dual-Stage Amplifiers, method to design single-stage negative-feedback amplifiers with low . susceptibility. This chapter concentrates on designing multiple-stage negative-feedback amplifiers with low specified . susceptibility. To limit the complexity of the analysis, the number of stages is restricted to two in this wo

宽容

Realizations,sented in the previous chapters. This chapter presents some designs of negative-feedback amplifiers using the models and the method developed in those chapters, to demonstrate and verify the design method. Therefore, application specific amplifiers with low . susceptibility are designed for relative

北极人

拘留

https://doi.org/10.1007/978-3-031-33588-4If the tested specimen is ferromagnetic, the material will have magnetostrictive properties. Generally, the ultrasonic waves will be excited and received by EMAT in the specimen so that both the mechanisms of . and magnetostriction are involved at the same time.