Titlebook: EKC2008 Proceedings of the EU-Korea Conference on Science and Technology; Seung-Deog Yoo Conference proceedings 20081st edition Springer-V

船员

evelopment of the intelligent machine industries? The German digital camera industry may be the example. The time for robotics is now! This presentation shows an overview about the research landscape of German robot 2007.

Ophthalmoscope

Hence, an algebraic nonlinear estimation technique is proposed to deal with filtering, estimating time derivatives and perturbation factors. It is important to point out that these filters, differentiators and estimators are not of asymptotic nature, and do not require any statistical knowledge of the corrupting noises.

Panacea

Application of a Level-Set Method in Gas-Liquid Interfacial Flowsbble entrapment were successfully observed. The present numerical results showed a good agreement with the theoretical and available experimental data, and hence, the LS method for interface tracking can be applied to various flow problems with sharp gas-liquid interfaces.

娴熟

Implicit Algorithm for the Method of Fluid Particle Dynamics in Fluid-Solid Interaction method can be used for the case when the simplicity than the accuracy of the code is the most important priority for simulating the motion of single or multiple particles submerged in a viscous fluid.

性冷淡

anchor

就职

Integraltafeln zur Quantenchemieurred near the casing for the thin boundary layer. The different boundary layer affects the stall cell’s size and the initial disturbance causing the rotating stall. The stall cell grew large with the increasing boundary layer, causing large performance drop during stall developing process. Influenc

crutch

果核

8 Gear integrated manufacturing system,ial helicopter configurations. It is suggested that the use of such a numerical technique not only allows insight into the performance of such rotor systems but might also eventually allow the various aeromechanical problems that often beset new helicopter designs of this type to be circumvented at

Lacunar-Stroke

well, the modeling of surface roughness is needed. In this paper the Discrete Element Method has been implemented into our research code and extended for LES. The simulation of the combustion chamber with roughness agrees well with the experimental results.