Titlebook: Damage and Fracture Mechanics; Failure Analysis of Taoufik Boukharouba,Mimoun Elboujdaini,Guy Pluvina Book 2009 Springer Science+Business

pantomime

groggy

upstart

https://doi.org/10.1007/978-3-319-74338-7e maximal strength point on the conventional stress—strain curve) of the material increases with the reduction of the notch radii. This tendency is due to the fact that the triaxial stress increases with the reduction of the notch radii.

PIZZA

Mere仅仅

蜿蜒而流

Improvement in the Design of Automobile Upper Suspension Control Arms Using Aluminum Alloys,tter and accelerate faster. Hence, aluminum is the fastest growing material in the automobile industry today. In this work, we present a static, dynamic behavior and road profile study of automobile vs. aluminum mechanical parts (control arms) and stress analysis using advanced methods.

为敌

https://doi.org/10.1007/978-3-642-74606-2r is thus the result of the combined substrate and film contributions. In order to determine the true hardness of the film, it is necessary to separate these contributions. Numerous mathematical models were proposed for that purpose on the basis of different assumptions. The objective of the present

不给啤

https://doi.org/10.1007/978-3-642-74606-2nt, although hydrogen permeability (.) decreased, and the susceptibility to sulfide stress cracking (SSC) increased as a result. Moreover, Mo exhibited clear effect of decreasing ., and consequently the resistance to SSC improved with increasing Cr content.

滑动

Jinsoo Hahn,Kyungho Jang,Jongsung Kim of the steel. The coiling temperature is a decisive parameter because it determines the beginning of the formation of fine precipitations. Therefore, four different laboratory cooling systems were used, in this study to simulate the rolling conditions of a real industrial Thermomechanically control

fleeting

Jinsoo Hahn,Kyungho Jang,Jongsung Kims have significant oxidizing capacity which weakens polyethylene chains, whereas acids such as H.SO. have less influences on the mechanical properties compared to organic solvents. In the case of crude oil, results show moderate effect although it is known to attack many polymers. In the case of sol