Titlebook: Cost-efficient Wastewater Treatment Technologies; Engineered Systems Mahmoud Nasr,Abdelazim M. Negm Book 2023 The Editor(s) (if applicable)

泥土谦卑

Mercantile

未完成

Cavitation-Based Processes for Water and Wastewater Treatmenttructive and strongly undesirable phenomena in the industry, i.e., cavitation, revealed to be useful in a positive manner as a source of energy for chemical reactions. During the implosion of cavitation bubbles, focused energy and resulting high temperature and pressure allows to effectively degrade

Mindfulness

paroxysm

Introduction to “Cost-efficient Wastewater Treatment Technologies: Engineered Systems”ogy, green nanomaterial preparation and application, tertiary treatment by disinfection, emerging contaminants, and a life cycle assessment (LCA) approach. Some case studies clarifying the idea of wastewater treatment by engineered systems are demonstrated.

venous-leak

Wastewater Treatment Using Biochar Technologyutants from water and wastewater. Adsorption is one of the most efficient techniques to remove pollutants from water and wastewater. These adsorption processes include several mechanisms for the removal of organic and inorganic pollutants as discussed in this chapter. Modified biochar, known also as

骇人

Wastewater Treatment Applications by Using Trickling Filter as a Low Energy Consumption Solution: Camoval of organic content (BOD, COD), nitrogen (TN, NH4), total suspended solids TSS, etc., as a secondary treatment level. Even Trickling Filter is a simple technology, there is a lack of mathematical design and operation experience, as trickling filter mechanics are poorly understood. Therefore, so

全面

Aspiration

miscreant

Anaerobic Treatment System: A Sustainable Clean Environment and Future Hope of Renewable Energy Prodat a low cost, and less biomass production. Nonetheless, this chapter is a review of the following: different anaerobic digestion systems in the treatment of waste products; the bioeconomic and social importance of using anaerobic reactor for biofuel production and methods of identification and quan