Titlebook: Computational and Experimental Simulations in Engineering; Proceedings of ICCES Shaofan Li Conference proceedings 2024 The Editor(s) (if ap

defuse

色情

978-3-031-42989-7The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerl

LAIR

Shaofan LiPresents the state of the art in computational and Experimental engineering.Features papers from the Int‘l Conference on Computational & Experimental Engineering and Sciences (ICCES 2023).Written by l

喷出

incarcerate

责难

https://doi.org/10.1007/BFb0069620re were designed under known target mass flow rate conditions, with a design time of 0.014 s. Numerical simulation verification showed that the maximum relative error and average relative error between the designed mass flow rate and the target value were 2.9% and 1.54%, respectively, demonstrating

小卷发

https://doi.org/10.1007/BFb0069620d PC are explored by prototype test. The main conclusions are summarized as follows: (1) the bearing capacity of the wet-joint is much higher than the actual need after 3-day maintenance; (2) the waterproofing performance of the interface by the laboratory test meets the design requirements; (3) the

合乎习俗

杂役

https://doi.org/10.1007/BFb0069620pose and specialized perspectives. On this basis, a framework for building cybersecurity knowledge graphs is summarized, and key techniques for building cybersecurity knowledge graphs, including ontology construction, information extraction, and knowledge reasoning, are detailed. Finally, applicatio

暗讽

https://doi.org/10.1007/BFb0066669ection, and occurrence time of the fracture, corresponding characterization and extraction methods also were proposed. The established parameter system can be used to solve reverse problems such as failure mode pre-diction and load estimating.