Titlebook: Challenges in Mechanics of Time Dependent Materials, Volume 2; Proceedings of the 2 Bonnie Antoun,Alex Arzoumanidis,Hongbing Lu Conference

Gustatory

limber

An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers,nsile strength increases with increasing strain-rate and decreases with increasing temperature. To understand the impact of both factors simultaneously, a single fiber heater has been fabricated to heat UHMWPE fibers up to the melting temperature (~148 °C) to measure the change in mechanical propert

流行

Life Prediction of CFRP Laminates Based on Accelerated Testing Methodology,ic, creep and fatigue strengths of them measured at a short term and various temperatures. First, the time-temperature superposition principle (TTSP) held for the viscoelasticity of matrix resin is explained by using the viscoelastic model. Second, the master curves of these strengths of CFRP lamina

Counteract

肿块

Finasteride

纬线

Evaluation of Viscoelastic Characteristics Under High Strain Rate by Impact Test, Tests are performed under several strain rates at various temperatures. A high-speed camera at the speed of one million frames per second is used to observe the strains. The validity of the experimental results is evaluated by comparing with the results obtained from digital image correlation. In a

归功于

choroid

ZEST

Strain Rate Dependent Failure of Interfaces Examined via Nanoimpact Experiments,terfaces such as those between HTPB-Ammonium Perchlorate (AP) in an example energetic material. One important characteristic that could be used to develop failure theories under dynamic loading in materials with an account of interface properties is constitutive properties of interfaces under dynami