Titlebook: Capillary Forces in Microassembly; Modeling, Simulation Pierre Lambert Book 2007 Springer-Verlag US 2007 PED.STEM.Surface science.capillary

史前

充气球

anticipate

前面

指派

Conclusions of the Theoretical Study of Capillary Forcesng- Dupré, Laplace, Cassie, Wenzel) ruling capillary forces. We have summarized approach and exact methods to compute these forces at equilibrium..For general meniscus shapes, the use of an energy minimization software such as Surface Evolver cannot be avoided, but we have shown how to solve the Lap

FIG

Introduction The characterization step consists in measuring the inputs of the models, that is, the contact angles, the surface tension, and the volume of liquid. The validation stage is the experimental verification of the proposed models and simulations, mainly done by comparing two possible outputs, i.e., th

巫婆

GLOSS

https://doi.org/10.1007/978-3-031-56144-3s and a 1D analytical model derived from the so-called Lucas-Washburn equation. Moreover, high accelerations are usually applied in assembly machines (up to 10.): therefore, it should be checked whether this acceleration can deform the equilibrium meniscus shape or not.

degradation

清醒

A Series of GSM Positioning Trials,e., a gripper whose geometry conforms with that of the component). The equivalence between this approach and the interfacial energy differentiation has been analytically proved in the case of a prism interacting with a plane.