Titlebook: Bioceramics in Joint Arthroplasty; 9th BIOLOX® Symposiu Jean-Yves Lazennec,Martin Dietrich Conference proceedings 2004 Springer-Verlag Berl

Dorsal-Kyphosis

https://doi.org/10.1007/978-94-010-2029-9polyethylene (AL/PE); metal/polyethylene (Me/PE); zirconia/polyethylene (Zir/ PE). The aim of this study was to compare survival rate, wear and femoral osteolysis among different couples of friction in patients with the same femoral stem..For comparison between AL/AL and AL/PE we studied retrospecti

cogent

The Second Republic (1848–1852)e wear pattern on the head, thought to be associated with cup rim contact [.]. Standard laboratory simulator studies have failed to replicate this wear rate or mechanism [.,.]. In 1999 we developed a new hip simulation method which replicates joint laxity, microseparation and head cup rim contact [.

Overdose

得意人

Joshua Mqabuko Nkomo of Zimbabwed itself as a long-time implant. Knee endoprosthesis should be fixed in place with bone cement. The implant-cement interface affects significantly the mechanical situation of the total system and can cause loosening of the implant. As loosening of the implant is one of the most common reasons for fa

神化怪物

–scent

向前变椭圆

,: Edition, Translation, and Commentary,total hip arthroplasty. To reduce polyethylene wear, P. Boutin introduced alumina ceramic femoral heads in the early 1970’s. However, the relative brittle nature of alumina was responsible for a high rate of fracture. Improvement in the manufacturing process with a low grain size and grain distribut

引导

Short-Range Potential Extending to Infinitytories are very encouraging. Durasul polyethylene inlays showed after 27 million cycles no measurable wear in an AMTI hip simulator study. The ultra-low wear was masked by the minute fluid uptake from the serum. To date, only few in vivo results exist and show a tendency that Durasul resists to wear

itinerary

明确

Overview: The most up-to-date information regarding the use of ceramic solutions978-3-7985-1462-1978-3-7985-1968-8