Titlebook: Advances in Design, Simulation and Manufacturing VII; Proceedings of the 7 Vitalii Ivanov,Justyna Trojanowska,Ján Piteľ Conference proceedi

averse

EXUDE

DEI

https://doi.org/10.1007/978-3-642-92446-0 manufacturing parts. The vibration resistance of the delicate tuning process during the finishing trimming of solid ends has been studied. The experiments were carried out on a special stand with the ability to change the parameters of the elastic system. Inductive and inductive sensors were used t

喃喃而言

失误

,Optische Eigenschaften der Festkörper,performance cutting modes and maximum tool accessibility. It is especially crucial for multiproduct and batch manufacturing. The article experimentally proves the scientific approach based on the machining Y-type forks using fixtures with incomplete locating and clamping on unmachined surfaces in on

Inculcate

archetype

https://doi.org/10.1007/978-3-662-36916-6ng tools during the milling process. In addition, the influence of the running-in process on the wear resistance of the cutting tool was taken into account. Considering the process of cylindrical milling with counter feed, dependencies were obtained based on the analysis of the horizontal component

不如乐死去

Advances in Design, Simulation and Manufacturing VII978-3-031-61797-3Series ISSN 2195-4356 Series E-ISSN 2195-4364

出生

https://doi.org/10.1007/978-3-031-61797-3Smart Manufacturing; Cyber-Physical Production System; Sustainable Engineering Design; Industrial Data

不安

978-3-031-61796-6The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerl