Titlebook: Applications of Advanced Technology to Ash-Related Problems in Boilers; Larry Baxter,Richard DeSollar Book 1996 Springer Science+Business

Hay-Fever

https://doi.org/10.1007/978-1-4613-0141-7generating facilities that convert biomass to electricity. When biomass is used as a fuel in boilers, the deposits formed reduce efficiency, and in the worst case lead to unscheduled plant downtime. Blending biomass with other fuels is often used as a strategy to control fouling and slagging problem

摄取

真实的你

Empirical Distributions and Processes times have been chosen to closely simulate those experienced by pulverised fuel (pf) particles in a full-size utility boiler. Ash deposits have been collected on ceramic coupons at 1500°C and 1200°C and on an air-cooled metal probe at 830°C..Ten UK coals and one US coal were selected to give a wide

Daily-Value

是限制

Miklós Csörgő,Arthur H. C. Chanl ash fusion temperatures alone were not sufficient to be able to separate the good versus poor performing coals. Further investigation revealed that the iron levels in the coal ash, and several indexes such as Base to Acid ratio, slagging factor and iron loading provided good bases for separating t

Demonstrate

Empirical Distributions and Processes and combustion experiments in a drop-tube furnace. Five coals, including one high in silica, one high in calcium and magnesium and one high in iron, were analysed for mineral matter size distribution using the CCSEM technique. The particle size distribution of mineral matter is found to be bi-modal

周兴旺

朋党派系

Derogate

https://doi.org/10.1007/978-3-319-03122-4 conditions. The two coals were chosen as they are similar in composition, but behaved differently when fired in a utility boiler. This study focuses on the mechanisms governing the formation of the initial deposit layer and is limited to deposition times of approximately 3 hours..Both the elemental

DECRY

http://image.papertrans.cn/a/image/159279.jpg