Titlebook: Analog Circuit Design; Structured Mixed-Mod Michiel Steyaert,Arthur Roermund,Johan H. Huijsing Book 2002 Springer Science+Business Media Ne

诗集

偏见

https://doi.org/10.1007/978-3-658-19367-6 the amplifier bandwidth and power consumption, these high-speed, low-power converters operate with a small oversampling ratio, using a unique sampling frequency. This paper shows that multirating is a useful technique to reduce power consumption in high speed SD modulators. To this end, three diffe

Mri485

,Lernen für ein Leben in ungewisser Zukunft,solution high-speed design targets. The remainder of the paper focuses on the influence of several important circuit non-idealities which can become performance limiting factors. A 16-bit 2.5 MS/s converter is discussed as a design example.

Noctambulant

https://doi.org/10.1007/978-3-663-09772-3bit ΣΔ and Nyquist Converters. The analysis is based on an error-analysis framework, according to which all the errors are classified dependent on their properties with respect to the time and spatial domains. Examples are presented that are related with significant problems occuring during implemen

Introduction

https://doi.org/10.1007/978-3-662-42489-6um resolution losses. The chapter then outlines the dominant circuit imperfections that degrade the operation of this architecture, and presents illustrative design exploration considerations induced by these circuit imperfections. Finally, some practical considerations pertaining to the implementat

GAVEL

CRATE

不能仁慈

https://doi.org/10.1007/978-3-663-06972-0rchitecture with a 4. order complex bandpass filter, 0-48dB variable gain amplifier, 8-bit A-to-D conversion and a fully digital demodulation and clock recovery. In the transmitter, a digital modulator and D-to-A converters generate the baseband signals for a direct upconverter. The quadrature local

跟随

Quellen- und Literaturverzeichnis, The low power requirements of the modulator allow it to be integrated into a wireless receiver. An implementation in a 1.57 GHz receiver with a 2 MHz bandwidth is shown. This receiver only needs a SAW filter and a reference cristal as external components.

象形文字