Titlebook: Advances in Mechanical Design; Proceedings of the 2 Jianrong Tan Conference proceedings 2022 The Editor(s) (if applicable) and The Author(s

整理

https://doi.org/10.1007/978-3-8349-6485-4 situation. First, the non-uniform rational b-spline (NURBS) technique is used to reconstruct the real tooth surface. Secondly, the instant meshing point is accurately calculated, and the instant contact ellipse corresponding to each meshing point is solved, then the contact pattern composed of the

aristocracy

斑驳

Management of Delirium on the Surgical Ward,tudy its vibration shape and natural frequency. Boring cutter’s stiffness and damping ratio are deducted analytically and verified by FEA method. The optimization analysis, taken high damping alloy sleeve wall thickness as parameter, is completed. The optimization goal is the maximum value of harmon

Engulf

Jianqi Liu,Jun Liu,Pan Li,Zhengze Kuang air squeeze film and its actuator could reduce suspending accuracy, and would induce the change of capacity and film thickness. In the present paper, Reynolds equation, energy equation of the squeeze film and heat conduct equation of the bearing are established, and then these equations are solved

START

Landlocked

esoteric

神秘

Xiali Li,Zhaoqi Wang,Bo Liu,Licheng Wustructed based on the contact compatibility condition, Tabor yield criterion and load balance equation. The return-mapping algorithm and the conjugate gradient method were combined to analysis the contact pressure and deformation. Relying on the power spectral density in the spatial domain, the digi

A精确的

晚来的提名