Titlebook: Advances in Manufacturing Processes; Select Proceedings o K. S. Vijay Sekar,Manoj Gupta,A. Arockiarajan Conference proceedings 2019 Springe

scotoma

Serenity

Conference proceedings 2019nd advanced metal forming. The book particularly focuses on finite element simulation and optimization, which aid in reducing experimental costs and time. This book is a valuable resource for students, researchers, and professionals alike..

内行

吞下

2195-4356 optimization, which aid in reducing experimental costs and time. This book is a valuable resource for students, researchers, and professionals alike..978-981-13-4669-9978-981-13-1724-8Series ISSN 2195-4356 Series E-ISSN 2195-4364

cliche

Sergey Arkhangelskiy,Ilya Muchniks, heat source model and the governing equations were incorporated into the finite element model. It is found that the predicted values of temperature while using three-dimensional finite element model are in good agreement with the experimental values.

付出

Reliability and Yield Improvement,uct the experimentation. This study is aimed to optimize the turning parameters to minimize the cutting force, surface waviness and flank wear by means of composite desirability grade approach. The analysis of variance (ANOVA) is conducted for composite desirability grade to recognize the influence of each turning parameter upon the responses.

CARE

slow-wave-sleep

某人

Costume

https://doi.org/10.1007/978-3-319-97788-1d and powder feed rate. The microhardness of the clad layer was measured, and the macrostructure of the clad area was analysed. The influences of the laser process parameters are observed, and optimum parameters were obtained to improve the clad quality.