Titlebook: Advances in Design, Simulation and Manufacturing V; Proceedings of the 5 Vitalii Ivanov,Ivan Pavlenko,Milan Edl Conference proceedings 2022

加剧

https://doi.org/10.1007/978-3-030-75817-2mic stability of the rotor movement was studied based on the developed mathematical model of its oscillations considering the circulating and internal friction forces. Finally, based on the Routh-Hurwitz criterion, the stability region of rotor movement in terms of the dimensionless frequency and friction coefficient was analytically obtained.

滴注

绿州

CADA: Clinical Background and Motivation of random changes in middle clearance and eccentricity values on pressure distribution based on the Reynolds equation. It is shown that the possible value of hydrodynamic force in such bearing can substantially differ from calculated under the deterministic models.

枯萎将要

CADA: Clinical Background and Motivation which exclude pulsations of the working fluid in planetary hydraulic machines for kinematic schemes 5/4, 7/6, 9/8, 11/10, and 13/12. The angular gap between the distribution windows was taken as 0°, 0°25′30″, and 0°51″. The number of additional unloading windows in the distribution system was taken as 0, 2, 3, and 4.

lacrimal-gland

Cerebral Aneurysm Detection and Analysisity of installing additional heat exchange equipment is allowed. The original requirement for recuperative heating with the available apparatuses was not feasible. A new scheme of the heating department with an additional spiral heat exchanger installation was proposed to accomplish this task.

MURKY

Conference proceedings 2022facturing. It covers recent findings concerning the mechanics of fluids, solids, and structures, and numerical and computational methods for solving coupled problems in manufacturing. Further, it reports on recent developments in chemical process technology, heat and mass transfer research, and ener

LITHE

摇晃

Advances in Design, Simulation and Manufacturing V978-3-031-06044-1Series ISSN 2195-4356 Series E-ISSN 2195-4364

增减字母法

Takayuki Michikawa,Atsushi Miyawakige of a rotor considering the randomness of the support rigidity change on the foundation is considered. The study finds a complex machine-building object - the steam turbine housing on the foundation. The subject of the study is the failure as a result of vibration resonance in the operating freque

AER

Evolution of the Marr-Albus-Ito Modelthe theoretical and practical part of the conditions for checking the strength of a beam (Rod). Graphically presented the stress . in height. We investigated the behavior of the rod (beam) model when calculating the tensile-compressive strength. Based on the results obtained, plots of longitudinal f