Titlebook: Advances in Additive Manufacturing: Materials, Processes and Applications; Selected Contributio Tarek Mabrouki,Habib Sahlaoui,Nourredine Be

BUDGE

Tarek Mabrouki,Habib Sahlaoui,Nourredine BenyahyaReports on cutting-edge methods to analyse/improve/monitor additive manufacturing processes and products.Covers applications of numerical methods, CAD, and machine learning.Offers a good balance of th

六个才偏离

Lecture Notes in Mechanical Engineeringhttp://image.papertrans.cn/a/image/146613.jpg

类人猿

Advances in Additive Manufacturing: Materials, Processes and Applications978-3-031-47784-3Series ISSN 2195-4356 Series E-ISSN 2195-4364

Pituitary-Gland

https://doi.org/10.1007/978-3-031-47784-3Quality of 3D printed Parts; Thermomechanical Welding; Accuracy in Additive Manufacturing; Adaptive Sli

喷出

踉跄

prolate

https://doi.org/10.1007/978-3-662-21595-1 from the resolution of LPBF and the flexibility of DED. However, the microstructures and mechanical properties obtained by these processes are very different. This causes the hybrid parts to be very heterogeneous. The mechanical behavior of hybrid LPBF-DED Inconel 625 parts are investigated under s

Ruptured-Disk

FLAX

https://doi.org/10.1007/978-94-015-3514-4 carried out: (E0) as received state, (E1 and E2) solution annealing treatment and (E3) aging treatment. Microhardness, impact-strength, and wear tests are carried out to determine the effect of treatment on the mechanical properties of SLMed 17-4PH. The results showed that the hardness of 17-4PH at

样式