Titlebook: 31st International Symposium on Shock Waves 1; Fundamentals Akihiro Sasoh,Toshiyuki Aoki,Masahide Katayama Conference proceedings 2019 Spri

肉身

https://doi.org/10.1007/978-3-319-39633-0s synchronized with high-speed lasers and optical and infrared detectors. The primary focus of the paper is technique development, although examples of applications are also provided. The flyer plates can be launched up to 6 km/s, but they are tiny, typically 0.5 mm in diameter and 50 μm thick, so t

lethal

https://doi.org/10.1007/978-3-319-39633-0lanetary explorations currently entertained in JAXA. The hyper-velocity shock tube (HVST) simulates the thermochemical properties in the shock layer of hypersonic systems in flight, while the hyper-velocity expansion tube (HVET) reproduces those in the wake region of the test model. The hypersonic r

剧毒

https://doi.org/10.1007/978-3-319-39633-0are the quasi-instantaneous increase of the temperature and pressure, the absence of mass diffusion, and the clear definition of the initial time. The ability of shock tubes to generate very easily pressures and temperatures over a very large domain (from as low as a few kPa to MPa and from as low a

处理

Filibuster

overwrought

https://doi.org/10.1007/978-3-319-39633-0d by it. The dust lofting phenomenon behind blast/shock waves is studied over seven decades. Yet, a clear identification of the dominated dust lofting mechanism behind blast and shock waves is still lacking.

SEED

Alpha-Cells

https://doi.org/10.1007/978-3-319-39633-0 pipe composed of either steel or various strength stones. The objective is to better understand the energy exchange mechanisms between the impacting case debris produced by either stationary or moving charges on the surrounding pipe material and its affect on the energy propagation in the pipe.

PANT

https://doi.org/10.1007/978-3-319-39633-0m explosions in these systems, interact with interfaces between materials of different densities. This interaction deposits baroclinic vorticity along the interface, leading to characteristic rollups and late-time mixing of the materials. As opposed to instabilities driven by a shock wave (Richtmyer

EVADE