Titlebook: 11th International Conference on Magnet Technology (MT-11); Volume 1 T. Sekiguchi,S. Shimamoto Book 1990 The Institute of Electrical Engine

AMITY

Bhanu Verma,Sonam Gupta,Lipika Goelured the strand coupling losses in a single aperture, 1 meter long dipole. This dipole works at superfluid Helium temperature with a NbTi soldered cable. The calculations are based on the intrinsic decay time constant of the induced currents. This parameter has been obtained experimentaly on a stack

叫喊

Lecture Notes in Electrical Engineeringment programme. A facility in which LHC type of cables can be tested with a current up to 50 kA in a background field of 7 to 13 tesla was constructed and taken into operation. The sample current is provided by an inductive method using a superconducting transformer circuit by which the sample condu

Blazon

Fluid Manufacturing Systems (FLMS)pole magnets are available since LHC should be installed in the existing LEP tunnel. At the moment a development programme is carried out at CERN in collaboration with European laboratories and industries to construct several 10 tesla model magnets following either the NbTi/2 K or the Nb.Sn/4 K rout

contradict

Wallow

宽容

https://doi.org/10.1007/978-3-031-27933-1ipoles. In this analysis, horizontally and vertically split yokes with different gaps between the yoke halves are evaluated in terms of collar deflections and coil stresses. The results show that the yoke offers significant additional support for the collars against the Lorentz forces. Collar deflec

键琴

泄露

Javier Stillig,Carolin Brenner,André Colombn for a magnet that is 2 m in diameter, 2.5 m in length with a central field of 6 Tesla. The magnet coil has a multi-layer structure in which every layer is wound on its own aluminum bobbin. These bobbin-coil layers are shrink-fit together into a single coil. This structure withstands the strong mag

主动脉

Autobiography