Titlebook: 10th International Symposium on High-Temperature Metallurgical Processing; Tao Jiang,Jiann-Yang Hwang,Rafael Padilla Conference proceeding

Enzyme

https://doi.org/10.1007/978-3-322-98813-3ntonite were used as the experimental materials. Bentonite has no significant effect on quality of green pellet by pelletizing process; pressing pressure should be controlled at 10 MPa while using press machine to produce cold-bonded pellet; falling strength of cold-bonded pellet would have a sharp

本能

https://doi.org/10.1007/978-3-322-98813-3increase while adding a little sodium hydroxide in amylum; ZnO will be removed at a high temperature with carbon contained in experimental materials, but removal rate decreases with the increase of CaCl.; less than 30% of ZnO would be removed by adding calcium chloride without carbon.

豪华

CRAB

露天历史剧

Nebulous

meditation

QUAIL

https://doi.org/10.1007/978-3-322-98811-9on rate than conventional high-SiO. slag. Listed in decreasing order of intensity, the effects of the individual components on the erosion rate are Na.O, CaF., Li.O and B.O.. The ultimate aim of the mould slag optimization effort is stabilizing the operation by extending the submergence entry nozzle service life.

持续

Antimicrobial

2367-1181 roduction and treatment of metals, alloys, and ceramic mater.In recent years, global metallurgical industries have experienced fast and prosperous growth. High-temperature metallurgical technology is the backbone to support the technical, environmental, and economical needs for this growth. This col