pantomime
发表于 2025-3-30 08:17:48
http://reply.papertrans.cn/27/2604/260302/260302_51.png
groggy
发表于 2025-3-30 13:10:43
http://reply.papertrans.cn/27/2604/260302/260302_52.png
upstart
发表于 2025-3-30 17:14:49
https://doi.org/10.1007/978-3-319-74338-7e maximal strength point on the conventional stress—strain curve) of the material increases with the reduction of the notch radii. This tendency is due to the fact that the triaxial stress increases with the reduction of the notch radii.
PIZZA
发表于 2025-3-30 23:01:50
http://reply.papertrans.cn/27/2604/260302/260302_54.png
Mere仅仅
发表于 2025-3-31 04:34:11
http://reply.papertrans.cn/27/2604/260302/260302_55.png
蜿蜒而流
发表于 2025-3-31 05:02:22
Improvement in the Design of Automobile Upper Suspension Control Arms Using Aluminum Alloys,tter and accelerate faster. Hence, aluminum is the fastest growing material in the automobile industry today. In this work, we present a static, dynamic behavior and road profile study of automobile vs. aluminum mechanical parts (control arms) and stress analysis using advanced methods.
为敌
发表于 2025-3-31 09:18:05
https://doi.org/10.1007/978-3-642-74606-2r is thus the result of the combined substrate and film contributions. In order to determine the true hardness of the film, it is necessary to separate these contributions. Numerous mathematical models were proposed for that purpose on the basis of different assumptions. The objective of the present
不给啤
发表于 2025-3-31 17:20:11
https://doi.org/10.1007/978-3-642-74606-2nt, although hydrogen permeability (.) decreased, and the susceptibility to sulfide stress cracking (SSC) increased as a result. Moreover, Mo exhibited clear effect of decreasing ., and consequently the resistance to SSC improved with increasing Cr content.
滑动
发表于 2025-3-31 20:31:37
Jinsoo Hahn,Kyungho Jang,Jongsung Kim of the steel. The coiling temperature is a decisive parameter because it determines the beginning of the formation of fine precipitations. Therefore, four different laboratory cooling systems were used, in this study to simulate the rolling conditions of a real industrial Thermomechanically control
fleeting
发表于 2025-4-1 00:41:26
Jinsoo Hahn,Kyungho Jang,Jongsung Kims have significant oxidizing capacity which weakens polyethylene chains, whereas acids such as H.SO. have less influences on the mechanical properties compared to organic solvents. In the case of crude oil, results show moderate effect although it is known to attack many polymers. In the case of sol