文字
发表于 2025-3-25 04:45:12
https://doi.org/10.1007/978-90-481-2669-9Metall; Polyamid; Sand; alloy; concrete; crystal; engineering design; fatigue; finite element method; fractur
squander
发表于 2025-3-25 11:21:38
978-94-007-9101-5Springer Science+Business Media B.V. 2009
好色
发表于 2025-3-25 14:50:30
Taoufik Boukharouba,Mimoun Elboujdaini,Guy PluvinaThe proceedings of the first conference of this kind, to be held every four years from now on
PHAG
发表于 2025-3-25 15:52:58
http://image.papertrans.cn/d/image/260302.jpg
Control-Group
发表于 2025-3-25 21:32:47
http://reply.papertrans.cn/27/2604/260302/260302_25.png
Ophthalmologist
发表于 2025-3-26 03:07:40
https://doi.org/10.1007/978-3-642-74606-2d solution to establish the metallurgical parameters that control HIC and SSC. Quantitative experiments indicate a threshold hydrogen concentration for HIC below which no cracking will initiate. Propagation of cracks occurs by hydrogen assisted fracture of the matrix surrounding the site where initi
动机
发表于 2025-3-26 05:18:56
https://doi.org/10.1007/978-3-642-74606-2trolled by a cathodic polarisation method. Fracture toughness for blunt pipe defect such as dent is measured on “roman tile specimen”. It can be determined either critical J parameter or critical notch stress intensity factor. Then the defect assessment is made using a notch modified failure assessm
backdrop
发表于 2025-3-26 09:49:31
http://reply.papertrans.cn/27/2604/260302/260302_28.png
似少年
发表于 2025-3-26 12:59:56
https://doi.org/10.1007/978-3-319-74338-7tigate this effect, tensile tests were performed using notched round bars with four different notch radii (2, 4, 10 and 80 mm). These tests were achieved on an Instron testing machine at constant strain-rate 10-3 s-1 and at ambient temperature. The measure of the local strain is done from the minima
Ethics
发表于 2025-3-26 18:35:27
http://reply.papertrans.cn/27/2604/260302/260302_30.png