Fretful
发表于 2025-3-30 08:58:32
Integrating Artificial Intelligence and Simulation for Controlling Steady Flow of Fixtures,e planning and management problems were not well addressed in the past publications as compared with the attention paid to the design issues. This paper is designed to address this problem using a decision-based fixture assignment and control method. A decision support framework is proposed to deter
字的误用
发表于 2025-3-30 15:55:52
http://reply.papertrans.cn/23/2202/220172/220172_52.png
控制
发表于 2025-3-30 20:10:06
CFX, Static Structural Analysis of Tractor Exhaust System Based on FEA,mperature and pressure. Present study deal with the behavior of exhaust manifold material under applied high gas temperature and pressure. The Solid Modeling of exhaust manifold has been done using Pro-E. ANSYS 14.5 has been used for analysis. The simulation parameter is exhaust gas temperature and
peritonitis
发表于 2025-3-30 21:31:25
FEA Simulation Based Thermo-mechanical Analysis of Tractor Exhaust Manifold,ifold under higher temperature. Thermal effect was considered to evaluate the FEA simulation results. Free vibration based modal analysis was performed to find the fundamental frequencies. The solid model of exhaust manifold was designed using Pro-E. Finite element analysis was performed using Ansys
杠杆支点
发表于 2025-3-31 04:42:06
http://reply.papertrans.cn/23/2202/220172/220172_55.png
Diatribe
发表于 2025-3-31 07:46:15
Conference proceedings 2016uses on the positive changes made in the field of robotics, CAD/CAM and future outlook for emerging manufacturing units. Some of the important topics discussed in the conference are product development and sustainability, modeling and simulation, automation, robotics and handling systems, supply cha
FANG
发表于 2025-3-31 11:50:24
http://reply.papertrans.cn/23/2202/220172/220172_57.png
受辱
发表于 2025-3-31 16:08:14
Moral zwischen Meinung und Normenmputed in the form of forces on the display system as well as on PC also. Tests finished at different machining factors revealed that the dynamometer could be utilized continually to evaluate cutting forces.
Evocative
发表于 2025-3-31 21:12:56
http://reply.papertrans.cn/23/2202/220172/220172_59.png
不近人情
发表于 2025-4-1 01:02:50
http://reply.papertrans.cn/23/2202/220172/220172_60.png