Dappled 发表于 2025-3-23 11:33:57

http://reply.papertrans.cn/23/2202/220172/220172_11.png

牌带来 发表于 2025-3-23 17:40:30

Investigating the Feasibility of BCI-Based Social Media Interaction,tter for the communication of public posts and private messages. An online P300-based BCI was developed which allowed for communication to Twitter. Three subjects participated in a programme of experimentation using the developed BCI. The BCI yielded an average classification accuracy of 86 % for th

CHASE 发表于 2025-3-23 20:53:43

Identifying and Updating the Kinematics of KUKA-iiwaR800 in CAD for Accurate Simulation,tics of actual robot and the dynamic parameters as in SM. Again cycloidal trajectories were used to validate the kinematic model in RA with SM. Inverse and forward dynamics of the robot was carried out in RA using the mass and inertial properties listed in the paper.

cringe 发表于 2025-3-24 02:03:31

http://reply.papertrans.cn/23/2202/220172/220172_14.png

sorbitol 发表于 2025-3-24 05:10:45

Stress Analysis of a Circuit Breaker Switchgear Mechanism by Using Multi Body Dynamics,MBD analysis software (Adams). The results obtained by using the members of the mechanism as rigid in the theoretical equations method and the flexible multi body dynamic method in which the members are treated as flexible are compared and presented.

玉米 发表于 2025-3-24 08:17:23

,Order Reduction of Interval SISO Systems Using Least Square Methods with a Linear Shift ‘a’ Obtainecan arise numerical problems. An approach is suggested to renew the technique more robust. Thus the denominator and numerator of the reduced interval model obtained by Least square methods and Time moment technique respectively.

creatine-kinase 发表于 2025-3-24 12:29:55

http://reply.papertrans.cn/23/2202/220172/220172_17.png

FADE 发表于 2025-3-24 15:25:31

Moral zwischen Meinung und Normeneduce total automation cost to only a few thousands rupees. In the piston side, toggle mechanism is used instead of direct drive to get extra mechanical advantage and safety features. The whole design is being simplified by cutting out some features which in turn reduce the total cost of the system

讥讽 发表于 2025-3-24 21:13:12

http://reply.papertrans.cn/23/2202/220172/220172_19.png

有权 发表于 2025-3-25 02:06:14

http://reply.papertrans.cn/23/2202/220172/220172_20.png
页: 1 [2] 3 4 5 6 7
查看完整版本: Titlebook: CAD/CAM, Robotics and Factories of the Future; Proceedings of the 2 Dipak Kumar Mandal,Chanan Singh Syan Conference proceedings 2016 Spring