thyroid-hormone
发表于 2025-3-26 22:15:11
http://reply.papertrans.cn/23/2202/220172/220172_31.png
Celiac-Plexus
发表于 2025-3-27 01:37:31
Nachfragemacht und internationaler Handelmperature and pressure. Present study deal with the behavior of exhaust manifold material under applied high gas temperature and pressure. The Solid Modeling of exhaust manifold has been done using Pro-E. ANSYS 14.5 has been used for analysis. The simulation parameter is exhaust gas temperature and
羊齿
发表于 2025-3-27 08:52:23
Nachfragemacht und internationaler Handelifold under higher temperature. Thermal effect was considered to evaluate the FEA simulation results. Free vibration based modal analysis was performed to find the fundamental frequencies. The solid model of exhaust manifold was designed using Pro-E. Finite element analysis was performed using Ansys
Occlusion
发表于 2025-3-27 11:30:00
http://reply.papertrans.cn/23/2202/220172/220172_34.png
Flu表流动
发表于 2025-3-27 16:05:38
http://reply.papertrans.cn/23/2202/220172/220172_35.png
发展
发表于 2025-3-27 19:50:41
http://reply.papertrans.cn/23/2202/220172/220172_36.png
Ceramic
发表于 2025-3-27 23:26:45
CAD/CAM, Robotics and Factories of the Future978-81-322-2740-3Series ISSN 2195-4356 Series E-ISSN 2195-4364
Type-1-Diabetes
发表于 2025-3-28 03:41:31
http://reply.papertrans.cn/23/2202/220172/220172_38.png
Permanent
发表于 2025-3-28 06:51:12
,Design and Development of a Low Cost Automation Injection Molding Machine of 250 g Capacity Using Meduce total automation cost to only a few thousands rupees. In the piston side, toggle mechanism is used instead of direct drive to get extra mechanical advantage and safety features. The whole design is being simplified by cutting out some features which in turn reduce the total cost of the system
Arthritis
发表于 2025-3-28 10:46:05
Design, Development and Testing of a Three Component Lathe Tool Dynamometer Using Resistance Strainped. These stress gauges insured to the cylindrical bar. The alignment of the cylindrical bar and stress gauge places has been identified to increase sensitivity and reduce cross-sensitivity. The designed dynamometer is capable of computing the forces acting on the workpiece in turning operation usi