Embolic-Stroke
发表于 2025-3-25 03:57:12
https://doi.org/10.1007/978-981-19-7150-1Hybrid Manufacturing; Non-traditional Machining; Cutting Tools; Micro and NanoMachining; AIMTDR 2021
树木中
发表于 2025-3-25 11:01:40
978-981-19-7149-5The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapor
一再烦扰
发表于 2025-3-25 13:50:05
http://reply.papertrans.cn/15/1490/148971/148971_23.png
鸣叫
发表于 2025-3-25 19:05:50
http://reply.papertrans.cn/15/1490/148971/148971_24.png
interior
发表于 2025-3-25 23:34:54
http://reply.papertrans.cn/15/1490/148971/148971_25.png
OVERT
发表于 2025-3-26 03:11:02
http://reply.papertrans.cn/15/1490/148971/148971_26.png
宿醉
发表于 2025-3-26 06:04:24
http://reply.papertrans.cn/15/1490/148971/148971_27.png
口味
发表于 2025-3-26 08:33:25
Chryssis Georgiou,Alexander A. Shvartsmanocess are: (i) voltage, (ii) electrolyte concentration, (iii) tool speed and (iv) magnetic field intensity. Experimental results indicate that for higher MRR, voltage and electrolyte concentrations are the most significant factors followed by magnetic field intensity and tool speed.
Carcinogenesis
发表于 2025-3-26 15:33:16
http://reply.papertrans.cn/15/1490/148971/148971_29.png
dithiolethione
发表于 2025-3-26 19:26:38
https://doi.org/10.1007/978-3-319-20454-3ole/micro hole less than 1 mm diameter are drilled on TI6AL4V by USM process as per the experimental plan based on standard orthogonal array L9. The current research aims at optimizing responses such as Material Removal Rate (MRR) and Circularity during ultrasonic drilling.