找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: Smart Technologies for Power and Green Energy; Proceedings of STPGE Rudra Narayan Dash,Akshay Kumar Rathore,Manoj Debn Conference proceedin

[复制链接]
楼主: 无感觉
发表于 2025-3-30 11:56:21 | 显示全部楼层
发表于 2025-3-30 14:25:26 | 显示全部楼层
PQ Analysis of T-VSI and ICT-VSI with Their Impacts on 3-P 3-W Utility System, the ICT-VSI is verified by simulations using MATLAB/Simulink environment. Finally, justified the advantages of the ICT-VSI on the base of PQ issues considering the standard value of IEEE-2030-7-2017 & IEC-61000-1 grid code.
发表于 2025-3-30 17:24:28 | 显示全部楼层
Intelligent Optimization Techniques for Controlling Load Frequency of Interconnected Multiple Sourcntroller‘s parameters with constraints. The ITAE is used as an objective function. The PID Controller kept the deviation of frequency and tie-line power of the MSPS within acceptable limits. A two-area power system comprising of different energy sources was designed using the Simulink tool of MATLAB.
发表于 2025-3-31 00:23:27 | 显示全部楼层
发表于 2025-3-31 01:02:41 | 显示全部楼层
发表于 2025-3-31 08:49:17 | 显示全部楼层
发表于 2025-3-31 12:19:47 | 显示全部楼层
发表于 2025-3-31 14:02:40 | 显示全部楼层
Role of Controller Zeroes in Stabilizing an Unstable System,put but also by graphical depiction of the change in the pole-zero patterns caused by the tuning technique. The system chosen for the demonstration is an open-loop unstable Maglev system which is gaining prominence in green and environment-friendly transportation and the tuning techniques chosen are Zeigler–Nichols and pole placement techniques.
发表于 2025-3-31 21:07:02 | 显示全部楼层
2367-3370 dia.Serves as a reference for researchers and practitioners .The book is a collection of best selected research papers presented at International Conference on Smart Technology for Power and Green Energy (STPGE 2022), organized by School of Electrical Engineering, KIIT, Deemed to be University, Bhub
发表于 2025-4-1 00:54:09 | 显示全部楼层
Matrix Magic Shifting to Extract Maximum Power Under Partial Shading Conditions, Shifting (MMS) with conventional configurations (CC). The performance has been evaluated in MATLAB/Simulink environment under six partial conditions. P–V curve, I-V curve, Global maximum power point (GMPP), mismatch loss (ML), fill factor (FF) and efficiency are the parameters used for performance evaluation.
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-5-29 04:37
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表