找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: Residual Stress and Its Effects on Fatigue and Fracture; Proceedings of a Spe A.G. Youtsos Conference proceedings 2006 Springer Science+Bus

[复制链接]
楼主: hector
发表于 2025-3-26 23:30:35 | 显示全部楼层
发表于 2025-3-27 03:14:24 | 显示全部楼层
发表于 2025-3-27 06:41:59 | 显示全部楼层
Conference proceedings 2006ed cracks, manufacturing flaws, service-induced cracking or suspected degradation of engineering components under normal and abnormal service loads. In many cases, welded joints are the regions most likely to contain original fabrication defects or cracks initiating and growing during service operat
发表于 2025-3-27 11:23:34 | 显示全部楼层
Sensitivity of Predicted Residual Stresses To Modelling Assumptionsffect the magnitude of predicted stresses, and to identify the limitations of the various modelling techniques. This paper describes how variations of the heat source representation and the material cyclic hardening behaviour affect the predicted residual stresses in an austenitic single weld bead-on-plate specimen.
发表于 2025-3-27 14:03:24 | 显示全部楼层
发表于 2025-3-27 19:52:13 | 显示全部楼层
Interaction of Residual Stress with Mechanical Loading in a Ferritic Steel. has been also used to estimate the combined crack driving force during loading to fracture of the specimens containing tensile residual stresses ahead of a crack/notch. It is shown that by having more accurate estimates of driving force created by the residual stresses leads to increased agreement between experiments and assessment.
发表于 2025-3-27 23:28:07 | 显示全部楼层
Finite Element Simulation Of Welding In Pipes: A Sensitivity Analysisneration in and around welds. A multi-pass weld joining two pipes made of different materials is simulated using 2-D axi-symmetric finite element analysis. The proposed methodology for weld simulation incorporates the well-known birth of elements technique and follows the prescribed temperature appr
发表于 2025-3-28 03:55:45 | 显示全部楼层
Residual Stress Prediction In Letterbox-Type Repair Weldst work. The repair is performed on a 2¼CrMo low alloy ferritic steel plate, containing a machined central groove of 9. depth, 200. length and 14. width. Three weld beads are deposited in the groove using AL CROMO S 225 2¼ CrMo electrodes. The repaired region is considerably long and narrow to enable
发表于 2025-3-28 09:39:53 | 显示全部楼层
发表于 2025-3-28 12:10:11 | 显示全部楼层
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-6-18 10:00
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表