Titlebook: Recent Trends in Nanotechnology and Materials Science; Selected Review Pape Ford Lumban Gaol,Jeffrey Webb Book 2014 Springer International

neurologist

Recent Trends in Nanotechnology and Materials ScienceSelected Review Pape

字的误用

observatory

Sound Absorption Properties of a Low Density Date Palm Fibers Panel,lm date fiber sample with perforated plate. Further investigation was carried out to test the effect of air gap backing and perforated plate facing combination on the sound absorption coefficient of the date palm fiber sample.

ureter

Chemical Solution-Based Synthesis of Nano-Magnesium Oxide Dielectrics,lue since the filler and the matrix were the same material. The result also revealed that the dielectrics with 1 wt% filler loading has good electrical properties while dielectrics 2 wt% filler loading was very uniform and compact.

mastoid-bone

时代

Enhancement of Nanocomposite for Humidity Sensor Application,nge of 40–90%RH. ZnO/SnO. composite nanorods performed the highest sensitivity with 265 ratio compared to the ZnO agglomerate nanoparticle and SnO. nanorod. The response and recovery time for ZnO/SnO. composite nanorods were 227 s and 34 s respectively.

陈旧

Improving the Surface Hardness and Wear Resistance of S45C Carbon Steel , Various Heat Treatments aMeanwhile, the authors make an effort to improve the surface hardness and wear resistance of S45C steels through various heat treatments. The experimental results show that the specimens using acid and alkaline baths of pH5 and pH8 resulted in maximum hardness; the hardness values were the HV. 701 a

olfction

Enhancement of Nanocomposite for Humidity Sensor Application,D). The sensor properties were characterized using current-voltage (.–.) measurement (Keithley 2400). The results analyzed were for ZnO agglomerate nanoparticle, SnO. nanorod, and ZnO/SnO. composite nanorods. The structural properties were characterized using field emission scanning electron microsc

mastoid-bone

领袖气质

Nanozeolite Produced by Wet Milling at Different Milling Time,eolite particle may be reduced by mechanical treatment such as ball milling or grinding in order to get smaller particles. In this chapter, the effect of milling time on particle size and surface morphology of Zeolite were investigated by a few designed experiments in aqueous environment. Zeta-sizer