Titlebook: Recent Trends in Mechanical Engineering; Select Proceedings o G. S. V. L. Narasimham,A. Veeresh Babu,Rajagopal D Conference proceedings 202

Apoptosis

Combustion and Emission Behaviour of Honge Biofuel in a Thermal Barrier Coated Diesel Engine Suitabdiesel in a single-cylinder IC engine which would be ideally suitable for agricultural field. The engine combustion chamber was coated with thin film ceramic material YSZ of 150 μm thickness using plasma spray technique and fuel injection pressure was varied. Honge blend B15 at 230 bar exhibited ear

饰带

过分自信

ligature

Performance and Emission on Raw Vegetable Oil with Hydrogen-Enriched Air for Better Combustion in amarine. Diesel engines are the main power source for the transport. There is a huge demand for fossil fuel and strict norms on pollution also compel the researchers to probe in for discovering alternate fuels. Present work investigates the use of high viscous raw vegetable oil, Simarouba glauca (SG

Crohns-disease

CLOUT

Effect of Change in Focal Plane Position on Hole Characteristics of Nanosecond Pulsed Laser Micro D can be used as an application in some of the industries. In this experiment, the effect of change in focal plane position in the positive, that is upward, direction on the hole parameters is studied and explained. A stainless steel 316 plate is used as the workpiece and a diode-pumped nanosecond pu

intricacy

Keratin

Experimental Investigation of Ball Burnishing Process Parameters Optimization for Al 5083 Using Tag process parameters for burning. The test piece and ball materials used are Aluminum Alloy 5083 with different percentages of zirconium and high carbon chromium with 6 mm diameter. The levels of parameters of the input process parameters are selected on the basis of one element at a time of the expe

Pantry

Experimental Investigation on Strength of Friction Stir Welded Al 6061-T6 Alloy Joints with Varyingys, particularly aluminum and its alloys, in various industries including aerospace and automotive. The tensile properties such as strength under tension of friction stir butt welded joints of Al 6061-T6 alloy sheets under the variable welding (oblique) angle 0°, 30° and 60° are experimentally inves

optic-nerve

A Comparative Study on Performance of 3D-Printed EDM Electrode with Conventional EDM Electrode,ine by the conventional machining process. Additive manufacturing is the process of creating a 3D object from a CAD Model by adding one layer over another layer. In this work, it is proposed to fabricate an EDM electrode using Direct Metal Laser Sintering (DMLS) 3D printing process and compare its p