Titlebook: Recent Advances in Mechanical Engineering; Select Proceedings o Ivan Tolj,M. V. Reddy,Achmad Syaifudin Conference proceedings 2023 The Edit

SLAG

2195-4356 racture, corrosion, tribology, and biomechanics. Given the contents, the book is useful for students, researchers, and professionals in the area of mechanical engineering and materials..978-981-19-0869-9978-981-19-0867-5Series ISSN 2195-4356 Series E-ISSN 2195-4364

散布

惩罚

Numerical Study on the Stress Distribution Analysis of Two-Planar DKDT Tubular Joint Under Variatiothe stress distribution trend for both side of the weld toe is close to similar, there are several shifting on the exact location. Hotspot stress from the tension axial loading case has the greatest value followed by compression axial loading and combined axial loading cases.

领带

Delirium

Ball Screw Regenerative Shock Absorber Design and Road Test for Small Class Multi Purposes Vehicle bump at a vehicle speed of 15 km/h and a restrictor of 25.. The maximum power yielded from BS-RESA on paving roads at a speed of 30 km/h and a restrictor of 20. is 5.34 W. The detailed results are analyzed and discussed in detail in this paper.

alcohol-abuse

Numerical Study on Dynamic Stabilities Prediction in a Small Unmanned Aerial Vehicle,igenvalues of short period and Dutch rolls as the representation of the UAV dynamic stabilities can be predicted by using 2-9-3-1 and 2-6-5-1 of ANN structures, respectively, with the mean square error of 1.0712e–07 and 2.6170e–08, respectively.

慷慨援助

Study of the Microwave Heating Energy Effect on the Electrochemical Performance of GDCSr Electrospulent collaboration between the unique properties of nanofibers and the selective heating properties of microwave energy enhances the electrochemical properties of composite cathode. Thus, a large number of triple boundary phase (TPB) sites can be effectively formed improving the transportation of oxygen ions into the electrolyte.

反馈

PV On-Grid Charging Station for Electric Scooter: Design and Fabrication,ling communication to GSM server is done by using SIM808 and internal communication by using CAN-bus. Experimental result shows photovoltaic contributes 33% of charging power requirement in clear weather. It needs 50 min time charging from 53 to 90% of battery SOC. Sequence billing process needs 3.05 min.

AND

繁殖

Conference proceedings 2023is book also covers material engineering, composite materials, biomaterials, fatigue and fracture, corrosion, tribology, and biomechanics. Given the contents, the book is useful for students, researchers, and professionals in the area of mechanical engineering and materials..