Titlebook: Recent Advances in Manufacturing Engineering and Processes; Proceedings of ICMEP Ramesh K. Agarwal Conference proceedings 2022 The Editor(s

DRILL

2195-4356 or sustainable materials including ceramic and polymer-matrix composite where there is paucity of good papers in the literature. This book proves a valuable resource for those in academia and industry..978-981-16-3933-3978-981-16-3934-0Series ISSN 2195-4356 Series E-ISSN 2195-4364

agnostic

Multiobjective Optimization of 3D-Printed Injection Molds via Hybrid Latin Hypercube Sampling-Delaunh multiobjective optimization. The proposed hybrid LHC-DT approach achieves reliable and apparent results for all multiple objectives so that the Pareto frontier of the data set of 1–30 is selected for assessment. According to the data set of 1–30, the optimum values of the temperature difference, m

GEST

Investigation the Ultrasonic Injection Molding of Polyamide 6e, holding time and molding temperature were also investigated. The Pareto chart expresses that the pressure and mold temperature are the two factors that have the most influence on the tensile strength.

Antioxidant

In-Situ Monitoring for Open Low-Cost 3d Printingared to the information extracted from the G-code for automatic detection of manufacturing defects. The area of missing or exceeding material is computed and shown to the user, which can decide to cancel the job in case of important flaws to avoid any unnecessary waste in terms of material, time and

隐藏

有害处

Meander

The Effect of Electrode Tip Diameter on Indentation Feature and Nugget Diameter of Resistance Spot W indentation depth on optimal nugget size corresponding to Korean Industrial Standard requirements for resistance spot welding. In case of welding in 1.2 mm thick steel sheets using electrode tip diameter of 8 mm, nugget diameter increased with increasing welding current and then the maximum tensile

现任者

排斥

Dysarthria