找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: Nanomaterials and Nanocomposites, Nanostructures, and Their Applications; Selected Proceedings Olena Fesenko,Leonid Yatsenko Conference pro

[复制链接]
楼主: 黑暗社会
发表于 2025-3-28 15:55:15 | 显示全部楼层
发表于 2025-3-28 21:46:02 | 显示全部楼层
发表于 2025-3-29 01:47:21 | 显示全部楼层
发表于 2025-3-29 05:42:00 | 显示全部楼层
,The Current State and Prospects of Using the Method of High-Speed Evaporation–Condensation for the attice density inside each layer; (2) Producing micro-layer condensates with a sufficient equilibrium structure at substrate temperatures of 0.4–0.5 of the least refractory layer. Electron beam technology can be successfully applied to porous materials.
发表于 2025-3-29 08:16:15 | 显示全部楼层
,Magnetoresistance and Magnetocapacitance Effect in Magnetic Tunnel Сontact with Perpendicular Anisoon the electron spin in a strongly gradient magnetic field. Such a magnetomotive force occurs with antiparallel magnetization of the magnetic electrodes and it has opposite directions for major and minor polarized electrons. As a result of the spatial separation of polarized electrons in the inversi
发表于 2025-3-29 12:58:50 | 显示全部楼层
,Peculiarities of Phase Composition, Microstructure, and High-Temperature (600–700 °C) Fracture TougCu (4.2 wt%). Bar specimens were prepared by electric-discharge cutting of ingots, and then the specimens were ground and polished. The specimens with a sharp edge notch underwent the fracture toughness test in a wide temperature range (20 °C to 700 °C). Based on the test results, it was concluded t
发表于 2025-3-29 18:15:52 | 显示全部楼层
,Studies on Microstructure and High-Temperature (600–700 °C) Mechanical Stability of Ti–Al–Mn–Si Come toughness test of specimens was performed in a temperature range of 20 to 700 °C. It was revealed that fracture toughness of the composite is in a strong relation to its microstructure and phase composition. In particular, high-temperature (600–700 °C) mechanical stability was attributed to the ap
发表于 2025-3-29 21:30:57 | 显示全部楼层
发表于 2025-3-30 01:27:35 | 显示全部楼层
Silicaphosphate Nanomaterials and Nanocomposites Doped with ZrO2 and TiO2: Structure, Functional Prcribed. It is noted that a key way, which allows one to produce silicaphosphate nanomaterials, is sol–gel method. However, for the large-scale production of silicaphosphates like ZrO.–SiO.–P.O., technological solutions can be used. These solutions, which contain both Zr and Si, are formed during the
发表于 2025-3-30 04:56:28 | 显示全部楼层
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-5-16 09:36
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表