用户名  找回密码
 To register

QQ登录

只需一步,快速开始

扫一扫,访问微社区

Titlebook: Mechatronic Modeling of Real-Time Wheel-Rail Contact; Nicola Bosso,Maksym Spiryagin,Aurelio Somà Book 2013 Springer-Verlag Berlin Heidelbe

[复制链接]
楼主: 古生物学
发表于 2025-3-26 23:57:44 | 显示全部楼层
发表于 2025-3-27 01:25:55 | 显示全部楼层
Introduction, at Politecnico di Torino. The book describes the following research topics: (1) development of an algorithm of the contact model which can be used for real-time simulation; (2) simulation and co-simulation of the multibody models of the test rig with the proposed contact model and control system; a
发表于 2025-3-27 06:24:38 | 显示全部楼层
Review of Wheel-Rail Contact Models,and rail is definitely the most important question for the study of the dynamic behaviour of a railway vehicle. In fact, the wheel-rail contact forces provide several fundamental functions for the vehicle: the support action for the vehicle load, the guidance action during the change of direction an
发表于 2025-3-27 10:46:18 | 显示全部楼层
Roller Rigs,ains the main concept of the use of a roller rig as a dynamic track simulator and briefly describes the existing full scale and reduced scale test facilities. The different similitude approaches to be used when dealing with scaled prototypes and their relative benefits and limitations are also descr
发表于 2025-3-27 14:08:30 | 显示全部楼层
Design of Scaled Roller Rigs,from 1998, several studies have been performed to develop and build a roller rig able to perform tests on scaled railway bogies and single wheelsets under different operating conditions. The studies have analysed the existing scaled roller rigs, and this information has been used to design the new e
发表于 2025-3-27 21:48:07 | 显示全部楼层
Contact Model,r rig test facility. Both wheel-rail and wheel-roller contacts are described. A bi-dimensional contact for the solid wheelset has been considered, and only the tangent track behaviour has been analysed.
发表于 2025-3-27 23:23:37 | 显示全部楼层
Real-Time Simulation of the Contact Model,e following steps: (1) integration of the contact model, which can be used for real-time simulation, in Simulink; (2) co-simulation of the multibody model of the test rig with the proposed contact model and control system (this step is required to generate input data needed for further verification
发表于 2025-3-28 03:05:00 | 显示全部楼层
发表于 2025-3-28 08:59:58 | 显示全部楼层
发表于 2025-3-28 11:28:25 | 显示全部楼层
 关于派博传思  派博传思旗下网站  友情链接
派博传思介绍 公司地理位置 论文服务流程 影响因子官网 SITEMAP 大讲堂 北京大学 Oxford Uni. Harvard Uni.
发展历史沿革 期刊点评 投稿经验总结 SCIENCEGARD IMPACTFACTOR 派博系数 清华大学 Yale Uni. Stanford Uni.
|Archiver|手机版|小黑屋| 派博传思国际 ( 京公网安备110108008328) GMT+8, 2025-6-11 21:42
Copyright © 2001-2015 派博传思   京公网安备110108008328 版权所有 All rights reserved
快速回复 返回顶部 返回列表