Titlebook: Lectures Notes on Advanced Structured Materials 2; Holm Altenbach,Leonhard Hitzler,Andreas Öchsner Book 2024 The Editor(s) (if applicable)

摄取

Julius Cronau,Florian Engstlerete by the concrete products based on mineral fillers and binders is discussed. Compression strength, bending strength, and kinetics of the development of linear strains of concrete during cyclic tests in the conditions of aggressive medium are studied.

FUSC

debris

patella

Determination of the Fatigue Behaviour of Laser Powder-Bed Fused AlSi10Mg Specimens Using Surface anshing. In order to investigate the fatigue strength, fatigue tests were carried out in the tensile threshold range at an .-value of 0.1. The fracture examination was carried out with the aid of a scanning electron microscope.

atopic

消灭

删除

ANT

organism

Elastoplastic Characterization of a Two-Component Epoxy-Based Structural Adhesive with air inclusions larger than 100 µm from the analysis, the scatter in the results is reduced to an acceptable level. Assuming isotropic material behavior, the mechanical response of the adhesive is fully characterized by additionally determining the shear modulus. This is done through torsion te

性行为放纵者