Titlebook: Laser Beam Micro-milling of Micro-channels in Aerospace Alloys; Saied Muhammed Hassan Darwish,Naveed Ahmed,Abdulra Book 2017 Springer Natu

智力高

高歌

Saied Muhammed Hassan Darwish,Naveed Ahmed,Abdulrahman M. Al-Ahmari

清洗

Laser Beam Micro-milling of Micro-channels in Aerospace Alloys

limber

Introduction,rend toward miniaturization, micromachining becomes an important activity in the fabrication of micro parts. Various technologies such as mechanical micromachining (micro drilling and micro milling), focused ion beam micromachining, laser micromachining are being used in microfabrication. Microfluid

Conjuction

Literature Review,om macro machining to micro and nano-machining of simple-to-complex shapes. The flipside of LBM is the existence of universal problems associated with its thermal ablation mechanism. In order to alleviate or reduce the inherent problems of LBM, a massive research has been done during the past decade

是突袭

Research Methodology,lable resources. Factorial design (FD), Response Surface Methodology (RSM) with central composite design (CCD) and Taguchi robust design methodology are the most widely used DOE techniques in material processing experiments. Laser processing of materials is a complex process and involves large numbe

GET

注视

Dry Laser Beam Micro-milling (DLBMM) of Aerospace Alloys, Five different sizes of micro-channels were produced in each of the said material. The micro-channel sizes include 100x50 µm, 200x100 µm, 400x200 µm, 800x400 µm, and 1000x500 µm. A full factorial response surface methodology (RSM) based face centered central composite design (FCCCD) was utilized to

BRIEF

粘土