Titlebook: Innovative Product Development by Additive Manufacturing 2022; Roland Lachmayer,Behrend Bode,Stefan Kaierle Conference proceedings 2023 Th

漂泊

Characterization of Additive Manufactured Structures for the Development of Foam-Replacement Cushiononal polyurethane (PUR) foams have only a very limited ability to adapt the distribution of the seat load in the seat cushion to the individual person. In this paper, a potential analysis is conducted to show the extent to which a replacement model for PUR foams can be realized using thermoplastic p

reperfusion

Benzodiazepines

Resource-Efficient Sintering Supports for the Metal Binder Jetting Process metal components. However, shrinkage of approx. 20% occurs during the sintering process, which often leads to undesirable component deformation and thus to component defects due to relative movement between the component and sintering base and the associated frictional forces. One way of minimizing

放肆的我

Product Redesign for Hybrid Additive Manufacturing Driven by Product Architecture Transformation - A This study builds upon existing function-oriented part identification methods. These approaches have been further developed towards identifying and evaluating potential product redesigns for powder bed (Laser Powder Bed Fusion), powder spray (Cold Spray), and hybrid additive manufacturing. Our meth

继而发生

Advanced Temperature Sense and Control Methods for Selective Laser Sintering mechanical properties. The laser power is kept at a fixed value while printing because most SLS printers assume a constant temperature in the building volume on the powder surface. The assumption of an even temperature distribution is incorrect in a lot of cases. In this chapter a modular system fo

动机

极小

反抗者

http://image.papertrans.cn/i/image/467453.jpg

遭遇

https://doi.org/10.1007/978-3-031-27261-5Product development; Additive manufacturing; Optimization; Effect Engineering; Process chain; Mass custom

镀金

nden der verschiedenen Muscheln, besonders der unteren Nasenmuscheln, und Schleim- oder Eiterbildung im choanalen Bereiche. Nun kann diese Infektion eine Erkrankung sui generis der Nase darstellen oder als Teilerscheinung einer allgemeinen akuten Infektionskrankheit mit in Erscheinung treten.