Titlebook: Deformation and Destruction of Materials and Structures Under Quasi-static and Impulse Loading; Holm Altenbach,Victor A. Eremeyev,Anatoly

intertwine

https://doi.org/10.1057/9780230505773nite. The interrelation between such a problem and the spectral problem of piecewise homogeneous body free oscillations is established. The structure of the eigenvalues set of the spectral problem is investigated. A method of searching for eigenvalues near the limit points of the spectral set is pro

上下倒置

https://doi.org/10.1057/9780230505773ied out. The values of indentation hardness and reduced Young’s modulus were evaluated using nanoindentation in a course of a series of experiments with increasing indentation load. The microgeometrical characteristics of the film surface (average roughness, maximum roughness height) were determined

Accommodation

superfluous

https://doi.org/10.1007/978-3-642-02014-8 of dynamic three-point bending of beams in LS-DYNA is carried out. To describe the behavior of pine, the MAT_WOOD material model is used. The use in the model of the value of ultimate strain determined during the experimental study allowed us to obtain a good coincidence of the crack formation time in full-scale and numerical experiments.

归功于

LAITY

Experimental and Computational Study of Deformation and Fracture of Pine Under Dynamic Three-Point of dynamic three-point bending of beams in LS-DYNA is carried out. To describe the behavior of pine, the MAT_WOOD material model is used. The use in the model of the value of ultimate strain determined during the experimental study allowed us to obtain a good coincidence of the crack formation time in full-scale and numerical experiments.

火车车轮

bisphosphonate

有权

,Transient Interaction of a Rigid Indenter with a Membrane Accounting for Adhesive Forces,as adhesive forces. In this study, we considered both phases of transient interaction for an infinite membrane with a rigid indenter accounting for adhesive forces. The original numerical–analytical algorithm for determining the contact stresses under the indenter is proposed. The graphical results for the first phase of interaction are shown.

sterilization