Repetitions
发表于 2025-3-30 08:23:12
Sustainability Analysis of Cutting Fluids in Minimum Quantity Lubrication of Machining Operations,spensing system, based on MQL, for delivering cutting fluids. A preliminary experimental investigation was conducted on unblended oils, i.e. metal working fluids (MWFs), with a view to further develop a better effective cutting fluid along with a delivery system. Influence of basic machining paramet
ARENA
发表于 2025-3-30 14:02:02
http://reply.papertrans.cn/89/8835/883410/883410_52.png
Aviary
发表于 2025-3-30 16:35:01
http://reply.papertrans.cn/89/8835/883410/883410_53.png
CLEAR
发表于 2025-3-30 21:06:54
Evaluation of Machining Properties of Short Bamboo Fiber-Based Green Composites Using CNC Drilling erties. Machining of these composite materials is one of the important operations while manufacturing different engineered components. The machining of NFRP composites bit difficult and differs from other composites. The aim of the paper is to machining study of short bamboo fiber-based green compos
inspiration
发表于 2025-3-31 00:51:15
Influence of Burnishing Process on Tensile Strength of Al7075-T6 Alloy,The process results in improved surface finish, microhardness, resistance to wear and corrosion, fatigue life, and creep life. In the current work, the effect of ball burnishing process on the ultimate tensile strength (UTS) of Al7075-T6 alloy is analyzed using Taguchi method. The effect of four con
sinoatrial-node
发表于 2025-3-31 08:10:56
http://reply.papertrans.cn/89/8835/883410/883410_56.png
抛物线
发表于 2025-3-31 11:45:48
http://reply.papertrans.cn/89/8835/883410/883410_57.png
表两个
发表于 2025-3-31 17:03:05
http://reply.papertrans.cn/89/8835/883410/883410_58.png
optional
发表于 2025-3-31 18:27:04
http://reply.papertrans.cn/89/8835/883410/883410_59.png
Harass
发表于 2025-4-1 00:01:40
Comparison of Copper and Tungsten Electrodes for the Electric Discharge Machined SUS-316L,he experimental work was performed according to Taguchi’s methodology of orthogonal array considering electrode, current, pulse-on time, pulse-off time as input parameters. Three output responses, i.e., material removal rate, surface roughness, and microhardness were opted for deciding the significa