乞讨
发表于 2025-3-28 18:19:41
http://reply.papertrans.cn/83/8236/823508/823508_41.png
wreathe
发表于 2025-3-28 21:58:18
Effect of Copper Fins on Fresh Water Productivity of Pyramid Solar Still,eld strongly depends upon the solar radiation intensity and ambient temperature. The introduction of copper tubes, which act as fins, on the black absorber plate leads to increase in daily fresh water production, up to a maximum value of 1.95 L/m. for CASE-3. The distilled water output for CASE-3 an
addict
发表于 2025-3-28 23:24:25
Numerical Study to Evaluate the Flow Behaviour of the Gases for a Downdraft Gasifier,t for the combined heat power (CHP) and electricity generation. The proximate and ultimate analysis of biomasses was obtained and calculated to generate stoichiometry and reaction mechanisms using the coal calculator in the species transport code. The results of the study show the optimum conditions
Lime石灰
发表于 2025-3-29 04:05:30
Experimental Investigations of Nano-BaTiO3-Filled HTV SiR Insulating Specimen Under Rainy Condition indicates better hydrophobicity. Flashover voltages measured under dry and wet conditions show that the specimens with 5 wt% filler concentration have a value of 31.11 kV and 21.98 kV, respectively, which is better as compared to the unfilled, 1 wt% and 3 wt% filled nanocomposites. Fourier transfor
Lobotomy
发表于 2025-3-29 10:18:07
,Exergy Analysis of a 660 MW Thermal Power Plant,the available literature. The present paper reveals that the excel sheet approach is highly accurate and less time-consuming method to evaluate exergy at different points in the system. This study will also help the researcher to develop such a simplified strategy in other thermal sectors.
intangibility
发表于 2025-3-29 11:30:26
http://reply.papertrans.cn/83/8236/823508/823508_46.png
现代
发表于 2025-3-29 16:59:21
Thermo-Hydraulic CFD Analysis of Impinging Jet Solar Air Heater with Different Jet Geometries,00 to 16,500. Results show the maximum and minimum enhancement in heat transfer of 1.66 and 1.14 times for circular and triangular shape impinging solar air heater, respectively. The maximum value of the thermo-hydraulic performance parameter is obtained as 1.16 for circular jet impinging solar air
octogenarian
发表于 2025-3-29 22:34:43
http://reply.papertrans.cn/83/8236/823508/823508_48.png
盟军
发表于 2025-3-30 00:16:12
http://reply.papertrans.cn/83/8236/823508/823508_49.png
SPER
发表于 2025-3-30 05:10:05
http://reply.papertrans.cn/83/8236/823508/823508_50.png