CODA
发表于 2025-4-1 04:08:58
A Comprehensive Review on Single- and Multi-Objective Optimization of Liquid Composite Moulding Proethod, simulated annealing, GA, NSGA-II and MOOGA are the most used traditional techniques for optimizing the process as well as mould parameters. The scope of meta-heuristic or hybrid optimization techniques for constrained single- and multi-objective optimization problem in the LCM process has add
吞没
发表于 2025-4-1 06:08:29
Effect of Heat Treatment on Microstructure and Room Temperature Mechanical Properties in 55Si7 Spristeel is dependent on the temperature and time of soaking during tempering heat treatment which is followed by water quenching. The optimum conditions of mechanical properties after hardening and tempering heat treatment are found to be at 500 °C for 2 h.
onlooker
发表于 2025-4-1 12:54:26
http://reply.papertrans.cn/83/8230/822989/822989_63.png
Ptosis
发表于 2025-4-1 14:58:02
Multiresponse Regression Modeling in Face Milling of Al6061 Using Design of Experiments,n conclude that feed rate is a significant parameter for surface finish followed by the speed and depth of cut, respectively. Again feed rate and depth of cut have an equivalent impact on the S/N ratios of material removal rate and speed does not affect the material removal rate. This research will
面包屑
发表于 2025-4-1 19:43:13
http://reply.papertrans.cn/83/8230/822989/822989_65.png
HEED
发表于 2025-4-1 23:10:50
A Study on Mechanical Attributes of Epoxy-Carbon Fiber-, Embedded Hybrid Composites,The prepared samples were cut as per the ASTM standards for examining the tensile, flexural, and hardness attributes of the material. The results reveal that the varying percentage of .+ carbon fibers heavily affect the mechanical attributes of the developed composites. With this varying dispersion,