不真
发表于 2025-3-23 10:22:50
Joining of Similar and Dissimilar Metals Through Microwave Hybrid Heating & Its Characterization: At using microwave energy in a multimode applicator at 2.45 GHz. Here, the use of electromagnetic radiations for joining similar & dissimilar bulk metals is studied briefly & also several parameters are discussed, such as exposure time, susceptor powder, separator sheet, size of interface powder & sp
STYX
发表于 2025-3-23 17:01:29
http://reply.papertrans.cn/83/8230/822989/822989_12.png
焦虑
发表于 2025-3-23 21:24:29
Investigations of Laser Machining Parameters Using Taguchi Approach for Response Kerf Ratio,he laser process has different process parameters that should be properly tuned while machining of workpiece material in order to have better quality characteristics. In this work, A CO. laser cutting machine is used for cutting the selected material “Hastelloy C276” having thickness of 3.7 mm. The
progestin
发表于 2025-3-24 02:04:57
A Review on Importance of Dielectric Fluids for Electro Discharge Machining (EDM),ntact free. During the time of machining a high voltage is applied and the current passes through the circuit, then it creates a high temperature (8000–10,000 °C) between tool and work material. For this reason, the work material gets melted and vaporized aptly. Also work material is eroded by therm
inflate
发表于 2025-3-24 03:21:47
http://reply.papertrans.cn/83/8230/822989/822989_15.png
浓缩
发表于 2025-3-24 06:52:58
Effect of Heat Treatment on Microstructure and Room Temperature Mechanical Properties in 55Si7 Sprie effect of heat treatment is essential for designing heat treatment conditions. The present investigation evaluates the room temperature tensile properties with microstructure evolution after annealing and normalizing heat treatment in 55Si7 steel. The yield strength and overall work hardening rate
不成比例
发表于 2025-3-24 13:27:10
A Review on Latest Trends on Different Research Domains of Composite Materials,rious forms and shapes of machines. The shapes of such machines can be mold into various other forms as well. They can be converted into various types of architectures having different chemical compositions with various properties and parameters. It is very important to determine about the quality o
粗鄙的人
发表于 2025-3-24 18:27:41
http://reply.papertrans.cn/83/8230/822989/822989_18.png
Dysarthria
发表于 2025-3-24 20:59:40
Multiresponse Regression Modeling in Face Milling of Al6061 Using Design of Experiments,al rigidity, etc. The purpose of this paper is to identify the optimal setting of machining parameters speed, feed rate and depth of cut on surface roughness (Ra), and material removal rate (MRR) in the face milling process. An L27 orthogonal array is used for face milling of Al 6061 T6 alloy. The s
output
发表于 2025-3-24 23:25:27
Computational and Experimental Methods to Investigate Fracture Behavior of Functionally Graded Mateging the material constituents. In recent decades, the crack problems of FGMs have attracted a significant amount of attention. This paper presents a comprehensive review of developments, applications, mathematical idealizations, computational and experimental methods, and solutions that are adopted