Systemic
发表于 2025-3-25 06:22:44
http://reply.papertrans.cn/83/8229/822849/822849_21.png
MUT
发表于 2025-3-25 10:20:22
,Optimization of Friction Stir Welding of Al–Cu Butt Joint Using Taguchi Method,olves the optimization of welding mechanism variables tool rotation speed (rpm), feed rate (mm/min), and tool offset (mm) to gain extremely rigid joints. The ANOVA reveals the percentage contribution of the three welding mechanism variables can be examined. From the Taguchi design of optimization te
meditation
发表于 2025-3-25 15:23:15
http://reply.papertrans.cn/83/8229/822849/822849_23.png
pulmonary
发表于 2025-3-25 15:54:11
http://reply.papertrans.cn/83/8229/822849/822849_24.png
Instantaneous
发表于 2025-3-25 20:18:45
http://reply.papertrans.cn/83/8229/822849/822849_25.png
围裙
发表于 2025-3-26 02:46:23
http://reply.papertrans.cn/83/8229/822849/822849_26.png
cauda-equina
发表于 2025-3-26 04:27:28
http://reply.papertrans.cn/83/8229/822849/822849_27.png
多山
发表于 2025-3-26 10:22:50
http://reply.papertrans.cn/83/8229/822849/822849_28.png
Factorable
发表于 2025-3-26 13:02:58
http://reply.papertrans.cn/83/8229/822849/822849_29.png
canonical
发表于 2025-3-26 19:39:54
Investigations on the Effect of Applying Minimal Quantity Lubrication (MQL) Cooling for Surface Milfocuses on applying Multi objective optimization and Ratio Analysis (MOORA) techniques for improving surface finish and material removal rate during the milling of cast iron. To promote eco-friendly machining, surface milling experiments were conducted using Minimum Quantity Lubrication (MQL) techni