黄瓜
发表于 2025-3-23 09:52:49
Flexible Piezoresistive Flow Sensor Based on PDMS and Graphite Particles,his, mechanical characterisation is performed to obtain the gauge factor and Young modulus of the PDMS composite material. Then, the flow sensor device is tested by measuring the resistance change under different fluid velocities.
dowagers-hump
发表于 2025-3-23 17:01:09
Conference proceedings 2024cal advancements in the area of manufacturing and materials engineering. Various topics covered in this book are additive manufacturing, rapid prototyping, micro and nano manufacturing, welding, casting, forming process, conventional and non-conventional machining, CIM, CAM, modeling and simulation,
tooth-decay
发表于 2025-3-23 22:05:28
,Optimization of Friction Stir Welding Parameters for the Optimum Hardness of Al–Cu Butt Joints Usinimization method, at 1000 rpm tool rotational speed, 40 mm/min feed rate and weld tool pin toward AA6101 alloy side will have the highest hardness. The tool rotational speed experiences a maximum significant impact on the joint hardness.
affect
发表于 2025-3-24 02:12:42
http://reply.papertrans.cn/83/8229/822849/822849_14.png
ANTH
发表于 2025-3-24 03:19:37
http://reply.papertrans.cn/83/8229/822849/822849_15.png
正式通知
发表于 2025-3-24 08:36:04
,Optimization of Friction Stir Welding of Al–Cu Butt Joint Using Taguchi Method,ts. The ANOVA reveals the percentage contribution of the three welding mechanism variables can be examined. From the Taguchi design of optimization technique, at 1000 rpm, 40 mm/min, and tool offset towards softer metal will possess maximum impact load. The tool’s rotating speed produced the greatest contribution to the impact load.
Overstate
发表于 2025-3-24 13:57:24
http://reply.papertrans.cn/83/8229/822849/822849_17.png
埋葬
发表于 2025-3-24 15:12:54
http://reply.papertrans.cn/83/8229/822849/822849_18.png
类似思想
发表于 2025-3-24 22:24:41
http://reply.papertrans.cn/83/8229/822849/822849_19.png
实施生效
发表于 2025-3-25 02:14:47
Synthesis and Characterization of Al7075 Microcomposites with MgO/Mn, done via salt spray analysis, Rockwell’s hardness machine, and universal testing machine. Al7075 alloy was melted at 700 °C with reinforcements added, and the mixture was then poured into sand molds. The microstructure of the casted samples of compositions Al7075 + 4%MgO and Al7075 + 4%MgO + 1.5%Mn