不出名
发表于 2025-3-25 07:15:20
Come prepararsi alle sessioni osservative,y phenomena that can be caused by overcompensation when simple models (such as Coulomb friction models) are used as a basis for the friction compensation. This model, in combination with an adaptive computed torque method were tested experimentally in a robot manipulator.
Accede
发表于 2025-3-25 08:57:25
Linda Mareen Neugebauer,Irene Zanko consistent environment model and an as precise as possible robot positioning. The experimental system (a mobile robot with a laser range finder and odometry) is presented and the theoretical approach is applied on actual data.
Champion
发表于 2025-3-25 13:01:36
http://reply.papertrans.cn/33/3214/321345/321345_23.png
PAGAN
发表于 2025-3-25 16:33:42
http://reply.papertrans.cn/33/3214/321345/321345_24.png
WAG
发表于 2025-3-25 23:28:19
Complicazioni della chemioterapiais proposed; dimensional analysis is employed to reduce the degrees of freedom of this model to 3. Results obtained from the study of this lower order model may be scaled to apply to all physical systems describable by the 7 parameter model.
欢乐中国
发表于 2025-3-26 02:10:09
Simonetta Ciarapica,Lorenzo Emmiroject. With this new sensor, using inductive contactless transducers, torques are evaluated by distance measurements of deflections in the sensor‘s structure. The new sensor provides a substantial increase in accuracy over conventional strain gauge sensors, achieves higher mechanical robustness, and presents lower sensitivity to electrical noise.
过分
发表于 2025-3-26 06:57:42
http://reply.papertrans.cn/33/3214/321345/321345_27.png
CHIDE
发表于 2025-3-26 12:05:00
http://reply.papertrans.cn/33/3214/321345/321345_28.png
公理
发表于 2025-3-26 14:49:36
Control of machines with non-linear, low-velocity friction: A dimensional analysis,is proposed; dimensional analysis is employed to reduce the degrees of freedom of this model to 3. Results obtained from the study of this lower order model may be scaled to apply to all physical systems describable by the 7 parameter model.
archenemy
发表于 2025-3-26 17:30:08
Design and development of torque-controlled joints,roject. With this new sensor, using inductive contactless transducers, torques are evaluated by distance measurements of deflections in the sensor‘s structure. The new sensor provides a substantial increase in accuracy over conventional strain gauge sensors, achieves higher mechanical robustness, and presents lower sensitivity to electrical noise.