争吵加
发表于 2025-3-30 09:35:34
Damping Behaviour of Bias Flow Perforated Acoustic Liners: A Parametric Studyroduct of pressure pulsations caused due to thermoacoustic feedback between the heat release and acoustic waves inside a combustor, which may result in excessive wearing or even cracking of exposed components within the combustor. There is a grazing flow, which grazes the perforations while another
COLIC
发表于 2025-3-30 13:33:06
Design and Fabrication of a Socket Jockey and Its Use in Home Automationm with a much more convenient and versatile solution. One of such mundane activities is the operation of household switchboards. This project provides the luxury of comfort while “jockeying the sockets of one’s household.” The world is facing the problem of overcharging, wherein a lot of phone compa
flutter
发表于 2025-3-30 19:37:04
Algorithm for Translation and Rotation Motions of Gantry Robotfacturing of any industrial gantry robot. A desk top 3D printer is suitably modified for the fabrication of robot, and measured translational motions are compared with prediction following well-known D-H parameter. A good agreement on the end positions between the test and prediction are illustrated
文字
发表于 2025-3-30 21:49:00
http://reply.papertrans.cn/31/3086/308518/308518_54.png
adequate-intake
发表于 2025-3-31 03:23:08
Classification of Motorcycles and Prediction of Indian Motorcyclist’s Posture at the Conceptual Desi the design. Current techniques followed for predicting rider’s posture include superimposing 2D manikin on the sketch of the motorcycle. To facilitate the designer/engineer, apart from demonstrating a method for classifying motorcycles, the current research proposes ‘rider triangle’ (connecting thr
Fester
发表于 2025-3-31 08:13:40
Performance Enhancement of Evaporative Cooling Device Using Silica Gel as an Adsorbent Material with the three sides of the evaporative cooler. The performance of system was tested at different flow rates with and without the use of silica gel. Therefore, it was observed that the performance of the system was reliable with the use of silica gel. However, the system is not run continuously bec
BLANK
发表于 2025-3-31 11:16:04
Design and Analysis of an Air-Purifier Using Cyclone Separator for Industriesmatter of concern as it causes several health hazards. One of the most cost effective and efficient methods to separate particulate matter is by using cyclone separator. Cyclone separator is a device without any moving parts having tangential inlet velocity of gas stream transformed into a compact v
教唆
发表于 2025-3-31 16:11:29
http://reply.papertrans.cn/31/3086/308518/308518_58.png
争吵加
发表于 2025-3-31 19:34:55
http://reply.papertrans.cn/31/3086/308518/308518_59.png
胎儿
发表于 2025-4-1 00:05:06
CFD and Thermal Analysis of the Flat Plate Collector—Solar Water Heater Under Steady-State Conditionlar water heater having a straight riser and header set-up. Records of mass flow rate were maintained and its effects on the outlet temperature of the water and the thermal efficiency were observed. ANSYS Fluent was employed for predicting the Nusselt number, heat transfer coefficient, outlet temper