ciliary-body
发表于 2025-3-23 11:45:33
http://reply.papertrans.cn/31/3086/308518/308518_11.png
accomplishment
发表于 2025-3-23 15:12:35
https://doi.org/10.1007/978-3-662-25241-3facturing of any industrial gantry robot. A desk top 3D printer is suitably modified for the fabrication of robot, and measured translational motions are compared with prediction following well-known D-H parameter. A good agreement on the end positions between the test and prediction are illustrated
allergy
发表于 2025-3-23 18:23:05
https://doi.org/10.1007/978-3-7091-4726-9led numeric (CNC) turning machine. It is suggested that this calculation should be included in the CNC lathes’ resident software program. This would decrease the amount of blocks of data required for part of the program. In a single block, a complete circular interpolation cycle for the number of pa
Synthesize
发表于 2025-3-23 22:25:46
http://reply.papertrans.cn/31/3086/308518/308518_14.png
俗艳
发表于 2025-3-24 04:11:40
Der Unterbau der Informationsgesellschaft, with the three sides of the evaporative cooler. The performance of system was tested at different flow rates with and without the use of silica gel. Therefore, it was observed that the performance of the system was reliable with the use of silica gel. However, the system is not run continuously bec
fastness
发表于 2025-3-24 09:57:32
http://reply.papertrans.cn/31/3086/308518/308518_16.png
栏杆
发表于 2025-3-24 14:29:56
http://reply.papertrans.cn/31/3086/308518/308518_17.png
Inflamed
发表于 2025-3-24 18:34:47
http://reply.papertrans.cn/31/3086/308518/308518_18.png
exclamation
发表于 2025-3-24 22:18:04
https://doi.org/10.1007/978-1-4471-1395-9lar water heater having a straight riser and header set-up. Records of mass flow rate were maintained and its effects on the outlet temperature of the water and the thermal efficiency were observed. ANSYS Fluent was employed for predicting the Nusselt number, heat transfer coefficient, outlet temper
Feedback
发表于 2025-3-25 00:18:51
http://reply.papertrans.cn/31/3086/308518/308518_20.png