里程碑
发表于 2025-3-28 14:55:43
http://reply.papertrans.cn/25/2424/242395/242395_41.png
GOAT
发表于 2025-3-28 19:21:13
http://reply.papertrans.cn/25/2424/242395/242395_42.png
昏迷状态
发表于 2025-3-29 02:47:28
Propaedeutic to a Study of Royce wise fast penetration test, and continuous-slow penetration test, all utilized for testing a representative stiff and accelerated 3D printing concrete mixtures. This research provides valuable insights into the opportunities and limitations of penetrometer tests in characterizing 3DCP.
Organonitrile
发表于 2025-3-29 03:31:03
Set-on-Demand Geopolymer for Concrete 3D Printing Using Ternary Activatore mix contains sodium hydroxide and sodium carbonate as activators, whereas different types of sodium silicate solutions were used for print head activation. It was found that the base mix exhibited static yield strength of less than 0.5 kPa at the end of 90 min and low viscosities ensuring high pum
keloid
发表于 2025-3-29 08:56:27
http://reply.papertrans.cn/25/2424/242395/242395_45.png
不可侵犯
发表于 2025-3-29 13:31:35
http://reply.papertrans.cn/25/2424/242395/242395_46.png
Pelvic-Floor
发表于 2025-3-29 16:44:16
Automated Force Sensitive Reinforcement for 3DCPrcement method is crucial. The bar insertion method has emerged as a promising approach, allowing for the insertion of conventional reinforcing bars into freshly printed layers to create a continuous reinforcement..However, this technique faces challenges related to the voids forming around the bar,
intolerance
发表于 2025-3-29 19:54:45
http://reply.papertrans.cn/25/2424/242395/242395_48.png
Gudgeon
发表于 2025-3-30 03:04:27
http://reply.papertrans.cn/25/2424/242395/242395_49.png
jocular
发表于 2025-3-30 04:54:56
http://reply.papertrans.cn/25/2424/242395/242395_50.png