抱狗不敢前
发表于 2025-3-25 05:42:30
Exploring the 2.5D SIMTP with the Adaptive Refinement Based on the Nodal Thicknesstion problems showed the islanding phenomenon where this pathology was not observed until after filtering. Also, an optimized MBB beam is 3D printed with ABS M30i material to demonstrate the capabilities of 2.5D SIMTP.
ELUC
发表于 2025-3-25 08:52:11
http://reply.papertrans.cn/25/2424/242395/242395_22.png
一个搅动不安
发表于 2025-3-25 15:28:53
Interfacial Cracking at Layer and Filament Interfaces of 3D Printed Concrete: Experimental and Numeral data. Then a finite element model incorporating the CZM is established to predict the interfacial cracking. The effectiveness of the numerical model is verified by comparing the simulation results with the experimental data.
Celiac-Plexus
发表于 2025-3-25 16:48:42
http://reply.papertrans.cn/25/2424/242395/242395_24.png
EXCEL
发表于 2025-3-25 21:00:32
2730-9576 tions and strategies in Materials, Processes, & Design.Offer.This book presents the dynamic advancements achieved in Construction 3D Printing, showcasing a wealth of insights from the conference held from 19-21 July 2023 at Nanyang Technological University (NTU), Singapore. Covering a broad spectrum
使入迷
发表于 2025-3-26 02:54:09
http://reply.papertrans.cn/25/2424/242395/242395_26.png
自传
发表于 2025-3-26 06:43:58
http://reply.papertrans.cn/25/2424/242395/242395_27.png
magnanimity
发表于 2025-3-26 12:24:58
http://reply.papertrans.cn/25/2424/242395/242395_28.png
Urea508
发表于 2025-3-26 12:40:38
http://reply.papertrans.cn/25/2424/242395/242395_29.png
雪崩
发表于 2025-3-26 17:18:18
Improvements in the Printability of Printed Mortar Using In-Situ Polymerizatione the printability of 3DPC. The results demonstrate that in-situ polymerization of acrylamide in mortar enables enhancements of the extrudability, green strength, flexural strength and layer bonding strength of 3DPC. The disadvantage is that the polymerization process will reduce the volume stability of 3DPC.